24
SETUP
Overtime Alarm
Option:
user selectable (off, 1 to 180 minutes)
Press the arrow keys to change the time values. To disable the alarm, select Off.
“OVERTIME ALARM MIN” message is scrolled on the bottom of the LCD screen.
Note:
To enter Overtime alarm screen, pump control mode must be set as Auto.
Flow Rate
Option:
user selectable (0.5 to 3.5 L/hour, 0.13 to 0.92 G/hour)
Press the arrow keys to change the values.
When in On/Off automatic control mode, the displayed value represents the actual flow rate.
When in Proportional automatic control mode, the displayed value represents a 100% flow rate.
“FLOW RATE L/H” or “FLOW RATE G/H” message is scrolled on the bottom of the LCD screen.
Level Alarm
Option:
Enabled (En) or disabled (diS)
Press the arrow keys to switch between the options.
“LEVEL ALARM” message is scrolled on the bottom of the LCD screen.
Note:
Option can only be used with properly wired level sensor.
High Alarm
Option:
Enabled (En) or disabled (diS)
Press the arrow keys to switch between the options.
“HIGH ALARM” message is scrolled on the bottom of the LCD screen.