Hanil T04B, User Manual

Page: 21 / 32

USER MANUAL T04B
A/S Inquiry : 02-3452-8966 / techsupport@ihanil.com ihanil.com 20
5. Maintenance
Chamber
1. After use, always dry the inside of the chamber.
2. If the chamber is contaminated, wipe with a mild detergent and wipe with a soft cloth to
prevent moisture.
Shaft
1. If rotation is unstable due to foreign substances on the shaft, it may cause imbalance problems
due to high-speed rotation,so it must be kept clean at all times.
2. After completing the experiment, remove the rotor from the rotating shaft, dry it with a dry cloth,
and keep it dry.
3. If the rotor does not separate from the rotating shaft, do not remove the rotor with excessive
force and contact a service center.
Rotor
1. If an acid, basic solution, or solution spills from the tube, immediately wipe it off with a soft cloth
dampened with warm water and store in a dry place.
2. The tube hole of the Fixed Angle rotor or the bucket of the rotor should be checked for
contamination of the solution from time to time and kept dry. It is recommended to store it upside
down when not in use for a long time.
Main body
1. If the exterior is contaminated, wash it with soapy water on a soft cloth and wipe it with a dry
cloth to prevent moisture from remaining.
2. Do not use chemicals such as alcohol, benzene, benzol, or thinner as they may damage it.
3. Be careful not to scratch the surface while cleaning or moving the external surface.
▶
If the surface is scratched, there is a possibility of rust.
▶
If rust is formed by leaving it wet for a long time, remove it with a neutral detergent and wipe it
with a dry cloth.