Hanil T04B, User Manual

Page: 20 / 32

USER MANUAL T04B
Sound rPt___03
Sound rPt___03
Eme
rg
en
cy
Li
d
O
p
en
19 ihanil.com A/S Inquiry : 02-3452-8966 / techsupport@ihanil.com
4.12 Manual lid opening in case of emergency
This method is used to remove the sample mounted on the rotor when the lid cannot be
opened automatically because the main body is not supplied with power.
1. After confirming that the inner rotor is completely stopped, check the
hole at the end of the arrow direction of the “Emergency Door Open”
label on the left side.
2. Push the provided Emergency Door Open Tool vertically.
▶
Lid opens manually with a “click” sound.
Manual lid opening must be performed after the machine has completely stopped rotating.
If this is not followed, it may damage the sample and the user, so be careful.
Do not close the lid immediately after emergency opening, wait until the power supply
starts, and use it in a normal way.
4.11 Set the number of end tones
You can adjust the number of ending sounds that sound at the end of the operation up to 99
(0~99, silent: 0).
1. Press and hold [AT SET SPEED] for
2 seconds or longer.
▶
[AT SET SPEED]
Press for more than 2 seconds
→ Enter end tone count mode
(Display screen: Sound RPT displayed)
2. Check “Sound RPT” on the display screen,
enter the number of end tones using the
numeric keypad, and then press [Enter].
▶
Press [Enter] → save the set value of the
number of end tones
▶
Number of end sounds → 0~99 times
(0: No end tone, 99: End tone repeats 99 times)