Hanil T04B, User Manual

Page: 11 / 32

USER MANUAL T04B
A/S Inquiry : 02-3452-8966 / techsupport@ihanil.com ihanil.com 10
Before use, make sure that the rotor is firmly connected to the motor shaft.
3.5 Tube mounting
2. After mounting the rotor to the central shaft in the chamber, fix it using the provided
rotor locking tool.
▶
Rotor mount: clockwise rotation
▶
Rotor removal: counterclockwise rotation
▶
Hold the rotor with one hand and rotate the rotor locking tool with the other to fix or remove.
▶
When using, sleeves must be installed in all holes of the rotor.
1. Before inserting the sample tube, check that there is no foreign matter or moisture inside
the rotor hole or bucket.
▶
If there is any foreign matter or moisture, be sure to remove it with a dry cloth.
Fixed Angle Rotor
· Use the tube for centrifuge recommended by Hanil Scientific Inc, and do not use it
above the allowable standard after checking the maximum RCF value for each tube.
·Samples are accurately measured in the same amount/density and placed in each
tube, then the tubes must be mounted on the rotor so that they are symmetrical to
each other. At this time, if the volume of the sample to be symmetrical is different,
severe vibration when the rotor rotates or serious damage to the rotor and motor
rotation shaft may be caused.
·Balancing with a balance should be performed to minimize the difference in weight
of the tubes containing the sample.
·Even if the number of tubes is the same, they will be asymmetrical according to their
positions, so when inserting tubes into centrifugal tubes facing each other, you must
also check the positions. If the number of tubes is not symmetrical, you must use an
extra tube and insert it to balance the same weight as the other tubes.