28
pulled out quickly.
–
Adjust the tilt angle of the steering
column.
–
Adjust the field of vision in the rearview
mirror.
–
Check whether the lifting chains are
evenly tensioned.
–
Check the function of the operating and
display parts.
–
Check whether the display works
normally.
–
Check the driver's seat switch: When the
driver is not sitting in the driver's seat
correctly, the driver's seat switch indicator
light on the instrument will light up and the
hydraulic function will not be operated.
–
Check the function of the steering
system.
–
Check whether the brake pedal works
normally.
–
Check the accelerator pedal: When the
accelerator pedal is pressed, the acceleration
should increase and the pedal should return
when released.
–
Check the steering angle display: Rotate
the steering wheel to the specific gear in
both directions and check whether the wheel
position is displayed on the instrumentation.
–
Check the hydraulic functions of
lift/lowering, tilt and attachments.
–
Check
whether
the
electrical
components such as lights, horns, and
reverse buzzers work normally.
2.3 Adjustment and replacement of
the forks
-
1. Adjustment of the forks:
-
In order to ensure safe operation in the
picking process, before the picking operation, it
is necessary to adjust the distance of the fork to
the appropriate position according to the size of
the load pallet.
-
Operating steps:
–
Pull up the fork stop dowel and rotate it
by 180° in any direction to release the lock of
the fork.
–
Adjust the position of the fork
symmetrically to both ends based on the
center line of the fork arm carrier.
–
After the fork clearance is adjusted, pull
up the fork stop dowel, and rotate it back to
the initial position, and then slightly move
the fork left and right to ensure that the fork
stop dowel is in the card slot of the fork arm