10
Multi-function display [13]
1
、
An introduction to the instrumentation functions
The XE series forklift truck's smart dashboard is an on-board color screen dashboard integrated with the CAN bus. It
can display vehicle speed, battery level, working hours, total mileage, Chinese/English display, password protection,
fault codes, drive and lithium-ion battery monitoring information, etc. At the same time, users can change the
driver parameters through the dashboard to meet individual customization needs.
2
、
Main interface display
A. Running mode
H. Steering angle
B. Running hours
I. Battery level
C. Odometers
J. Safety belt
D. Low battery display
K. Driver's seat switch
E. Fault indicator light
L. Neutral indicator light
F. Working device
restriction
M. Parking indicator light
G. Speed display
N. Slow mode
Running mode [A]
There are four running modes, respectively: Mode S, mode P, and mode E (slow mode).
Mode S
refers to the fast mode. In this mode, the forklift truck's acceleration, maximum
gradeability and other values are high, and the forklift truck is suitable for carrying a large
amount of cargo in a short time and climbing a slope. The power consumption of the forklift truck is highest in this
mode.
Mode P
refers to the normal mode. In this mode, all indexes are slightly lower than the fast
mode, and the forklift truck is suitable for normal operating environments. This is the default
mode.
Mode E
refers to the slow mode. In this mode, the maximum speed is limited, and the forklift
truck is suitable for working in crowded warehouses and narrow spaces.
Running hours [B]
When the key switch is turned on, the forklift truck running time starts counting. When the
key switch is turned off, the forklift truck running time stops counting.
