8
Lift control lever [9]
This lever is located in the right side of the center console and is used
to lift or lower the forks. The lifting or lowering speed is controlled by
the angle of the control lever.
Operating steps:
Lifting: Pull the control lever backward.
Lowering: Push the control lever forward.
Tilt lever [10]
This lever is used to tilt the mast forward and backward. It is located to
the right of the lift control lever. The speed is controlled by the angle of
the lever.
Operating steps:
Tilt forward: Push the control lever forward.
Tilt backward: Pull the control lever backward.
Caution
The multi-way valve is equipped with a forward tilt self-locking valve. Therefore when the power is off,
the mast cannot tilt forward even if the tilt lever is pushed forward.
Side shift control lever [11] (as required by attachments)
This side shift control lever is used to move the side shift frame to the left
or right. It is located to the right of the tilt lever. The speed is controlled by
the angle of the lever.
Operating steps:
Move left: Push the control lever forward.
Move right: Pull the control lever backward.
Attachment control lever (as required by attachments)
The attachment control lever refers to side shift control lever, turning control lever or other attachment
control levers, depending on the specific attachments fitted.
Cup holder [12]
A cup holder is located on the right side of the center console for holding the operator's cup.
