63
3. Lubrication of the mast
According to the requirements of the regular
maintenance and lubrication cycle, the following
parts should be lubricated regularly.
Caution:
A) The lubrication cycle should be adjusted
according to the operating conditions.In the
busy months of operation, the lubrication cycle
should be shortened.
B) In order to ease the forklift truck operation,
apply a layer of grease to the contact surface of
the lifting guide wheel and the inner & outer
mast.
Warnings
When applying grease, park the forklift on a
flat road, turn off the engine and engage
the hand brake. Prevent your hands and
body from being caught when applying
grease, and take care to avoid falling when
lubricating at height. Be careful
4. Chain lubrication
Spray the chain spray directly on the chain or take
a brush and apply the lubricating oil to both sides
of the chain.
5. Apply lubricating grease on the following parts
1)
Lubrication of mast seat bearing
2)
Lubrication of brake pedal (clutch)
3)
Lubrication of steering axle support shaft
4)
Lubrication of steering knuckle spindle
5)
Lubrication of steering linkage pin
6)
Lubrication of steering cylinder pin
6. Bolt and nut tightening
See maintenance cycle table
7. Check the tightening torque of the wheel nuts
Check whether the tightening torque of the wheel
nuts meets the requirements.
