17
Required Parts
• Fuselage
• #4 washer
• Hook and loop strap
•Plywood battery tray (electric)
• 6-32 x 2
1
/
2
-inch machine screw (4)
• 4-40 x 1/2-inch socket head screw
• 1-inch (25mm) aluminum motor spacer (4)
• 2
1
/
2
-inch (64mm) spinner w/hardware
Required Tools and Adhesives
• Phillips screwdriver
• Threadlock
• Hobby knife
• Soldering iron
• Solder
• Drill
• Hex wrench: 3/32-inch
• Female Deans connector w/wire
• Male Deans connector
Step 1
Attach the X-mount to the back of the motor using the
hardware provided with the motor. Remember to put a
drop of threadlock on each of the screws to prevent them
from vibrating loose.
Step 2
Attach the motor to the firewall using the four
1-inch (25mm) aluminum motor spacers and four
6-32 x 1
1
/
2
-inch machine screws.
Note
: Use threadlock on the screws to
prevent them from vibrating loose in flight.
Section 3B: Electric Motor Installation
