14
Step 2
Position the engine on the engine mount so the drive
washer is 4 inches (102mm) ahead of the firewall. Mark
the location of the engine mounting bolts using a felt-
tipped pen. Use a 9/64-inch (4mm) drill bit to drill the
holes in the engine mount.
Hint
: Use a drill press to get the holes in
the mount perpendicular to the mount.
Step 3
Mount the engine to the mount using four 6-32 x 1-inch
machine screws, four #6 washers and four 6-32 locknuts.
Step 4
Slide the 15-inch (380mm) throttle pushrod into the
pushrod tube and attach the clevis to the carburetor arm.
Step 5
Install the muffler onto your engine using the instructions
provided with the engine as a guide.
Section 3A: Two-Stroke Engine Installation
