16
❑
11. Place the aileron tray, glue side down, on the exposed
wood area on the bottom of the wing and gently press it
into position. Use masking tape if necessary to hold in
position until dry. Allow 15 minutes for the epoxy to
cure.
❑
12. Using a sharp hobby knife, carefully cut out the balsa
wood from the inside section of the aileron tray and
remove.
❑
13. Locate the wing center tape (white adhesive-backed
tape) and remove the adhesive backing. Starting at the
edge of the aileron tray, apply the tape around the wing
at the center section, ending at the other side of the
tray. Use a hobby knife to trim the excess length of
tape. Your wing is now complete.
❑
14. Locate the small blue decal (square in shape) on the
decal sheet included with your kit. Apply this decal to
the leading edge of the wing to cover the wing center
tape that you have just applied. Press firmly to ensure
that the decal adheres properly to the wing.
Section 4: Installing The Aileron Servo Trays
CONTINUED
Summary of Contents for Easy Fly 40
Page 47: ...47 ...
Page 49: ... Copyright 1994 Horizon Hobby Distributors Inc ...
