35
❑
3. Drill four 1/16” holes through the balsa dowel at the
marks, as shown.
❑
4. Locate the two remaining threaded rods. Using a pair of
needle nose pliers, bend a 90-degree angle 1/4" from
the unthreaded end of the rod. Repeat this procedure for
the other rod. Now locate the two short plain rods.
Using needle nose pliers bend a 90-degree angle 1/4”
from one end of the rods. Repeat this procedure for the
other rod.
❑
5. Locate one balsa dowel and insert the 90-degree end of
one threaded rod into the previously drilled 1/16” hole.
Cover the portion of the rod that touches the dowel with
thick CA glue.
❑
6. Slide a piece of the heat shrink tubing over the end of
the balsa dowel and shrink it into place using a heat gun.
Section 14: Installing The Linkages
CONTINUED
Summary of Contents for Easy Fly 40
Page 47: ...47 ...
Page 49: ... Copyright 1994 Horizon Hobby Distributors Inc ...
