27
Engine (not included)
Engine Mounts (2)
Engine Screws, Nuts, Washers (8)
Fuel Tubing
Fuselage
❑
1. Locate the two engine mounts. Note that they are cut on
an angle. They are designed to put right thrust into the
engine.
❑
2. Place the engine mounts, as shown, in the front of the
fuselage, noting the angled edges. Position the engine
to the right (right thrust). Trial fit the engine in place.
Using a pencil, mark the position of the four holes that
secure the mounts to the fuselage, as shown.
❑
3. Remove the mounts and drill four 1/8” holes at the
points you marked.
❑
4. Reposition the engine mounts and engine on the
fuselage, making sure right thrust is achieved, and
mark through the holes in the engine mount with a
pencil.
Note:
Motor mount in fuselage is designed with 8° of
downthrust.
Drill with 1/8” Drill Bit
Pencil
#2 Phillips Screwdriver
Section 12: Installing The Engine
Parts Needed
Tools Needed
Summary of Contents for Easy Fly 40
Page 47: ...47 ...
Page 49: ... Copyright 1994 Horizon Hobby Distributors Inc ...
