13
Horizontal Stabilizer with Elevator and Hinges
Vertical Stabilizer with Rudder and Hinges
CA Remover
Paper Towels
Thin Instant CA Glue
Section 3: Hinging The Rudder And Elevator
Parts Needed
Tools Needed
❑
1. Push the elevator and horizontal stabilizer together until
there is a constant 1/16” gap between the two and the
edges are lined up correctly.
❑
2. Deflect the elevator and apply thin CA glue at the
hinges so that it absorbs both into the stabilizer and the
elevator (4 places).
❑
3. Using the same technique, hinge the rudder to the
vertical stabilizer.
❑
4. Wipe off any excess CA using CA remover and a paper
towel. Set these assemblies aside for now.
Note:
After CA has dried completely, check to ensure that the
hinges are secured by pulling firmly on the control
surfaces.
Summary of Contents for Easy Fly 40
Page 47: ...47 ...
Page 49: ... Copyright 1994 Horizon Hobby Distributors Inc ...
