18
❑
1. The nose gear mount is pre-assembled onto the front
firewall of the fuselage. Locate the nose gear. On the
straight end, first slide the steering arm onto the nose
gear (note the orientation as shown in the photo). Use
thread lock and a #2 Phillips screwdriver to secure the
steering arm in place. Next, install a collar and secure it
in place with the thread lock and a machine screw. Now
slide the spring into position.
❑
2. Insert the nose gear assembly from Step 1 into the nose
gear mount (attached to the front of the fuselage). Be
sure the spring stays in position and rests against the
nose gear mount. Install the collar on the top end of the
landing gear flush with the landing gear, and secure it
into position with a screw and the thread lock.
❑
3. Attach the nose wheel and hold it in place using a
wheel collar and screw.
Nose Gear
Wheel (1)
Spring
Wheel Collar with Screws (2)
Steering Arm
#2 Phillips Screwdriver
Thread Lock
Section 6: Installing The Nose Gear
Parts Needed
Tools Needed
Summary of Contents for Easy Fly 40
Page 47: ...47 ...
Page 49: ... Copyright 1994 Horizon Hobby Distributors Inc ...
