Connect Braille
Error Messages
Page 51
Cause:
This message appears following any error message relating to the file sys-
tem. It provides information regarding the current version of the file system
(x.y), the number of the error (n), and an error description (t).
"Formatting, please wait!!!"
Cause:
This message appears while the disk medium is being reformatted
subsequent to a fatal error detected by the file system test.
Note:
When formatting has finished, you must reload the message file.
"Change Lithiumbattery"
Cause:
The internal lithium battery (not the four user accessible rechargeable
batteries) has lost voltage due to aging.
Remedy:
Only manufacturer authorized personnel may change the internal battery,
because the housing must be opened for this purpose. Please send your
Connect Braille to an authorized dealer, or directly to Help Tech.
"WRN: No kbd layout found. Using standard layout."
Cause:
During the Connect Braille's start-up procedure no valid keyboard layout
table was found.
Result:
The default internal German table will be used.
Remedy:
Download a valid keyboard layout table.
12.2 Error Messages from the Message File
The messages listed below come from the reloadable message file. They include
messages of a general nature and system messages.
12.2.1 General Messages
"Please wait!!!"
Cause:
This message appears while the system is executing a task requiring some
time.
"Cannot execute this function"
Cause:
A function cannot be executed.
"Deactivating function keys!"
Cause:
A reminder that function keys have been deactivated. After turning the unit
off and back on, the function keys will again be active.
12.2.2 File System Messages
"Error creating braille character set file"
Cause:
There is not enough memory in the file system to generate the Braille
character sets.
"New braille set file created! Please reload needed sets!"
Cause:
The Braille character set file was recreated, because it was either missing
or its size was incorrect. You will have to reload the required character sets
into the Connect Braille.
"Braille set x is empty"
Cause:
You are attempting to activate a Braille character set numbered x, but that
character set slot is empty.
"Error writing configuration file"
Cause:
An error occurred while saving the configuration.
"Saving configuration, please wait!"
Cause:
This message is displayed while the configuration file is being written.
