HandTop HT3020UV-C-K, Operation Manual

Page: 26 / 97

25 / 97
4.4.3 Chiller setting
4.5 Power input

The printer is high power consumption equipment of 6.5kw. The input power has to meet
with the rated value of AC 220V and 32A.
The specification of the power cable should be the diameter of 4
㎡
GB. It is also required
that the printer to be properly ground wired.
4.6 Lead screw installation
Foreword
：
For the package and transportation, 2518 Y axis lead screw needed to be
dismount, and install after unpacked
Parts:Guide rail stand,Rear bearing stand, lead screw
Tools
：
Bolt install&uninstall tool, allen wrench, screw driver, glove
1. Current water temperature
2. Power switch
3. Temperature setting
4. Add button
5. Setting button, long press for 3s for
the temperature setting adjust
(default 25
℃
), press again for the
temperature variation range(default
5
℃
). The set temperature should not
be 5
℃
above or below the room
temperature, in case condensation
on the surface of water tube.
6. Reduce button
7. Power indicate light
8. Water pump working light
9. Alarm setting instruction