HandTop HT3020UV-C-K, Operation Manual

Page: 55 / 97

54 / 97
5.2.5Control parameter interface-LED light on / off position setting
The adjustment password for the position of the LED light switch is ua13. After
inputting, click Check to open the fine-tuning setting function.The eight parameters
on the left are fine-tuning parameters, the unit is millimeters; the parameters are
described in detail as follows:
Position adjustment of left light on (mm) when the cart moves to the right and
position adjustment of left light off (mm) when the cart moves to the right:According
to the figure below, the top right large arrow indicates that the cart is moving to
the right, the black solid rectangle on the left side of the cart indicates the left
curing light; the vertical line i1 indicates the position where the LED light is on,
and the vertical line i2 indicates the position where the LED light is off, i1 and
The gray area between i2 is the illuminated area of
​ ​
the curing light on the left
side of the car. If it is found that the irradiation area does not coincide with the
image, you need to adjust the two parameters of "the left lamp on light position
adjustment (mm) when the cart moves to the right" and "the left lamp off light position
adjustment (mm) when the cart moves to the right". “The left lamp on light position
adjustment (mm) when the car moves to the right” adjusts the vertical line i1 position,
and “the left lamp light off position adjustment (mm) when the car moves to the right”
adjusts the vertical line i2 position; enter a positive number to indicate the position
Move to the left; enter a negative number to move to the right. Note that the entered
value indicates the amount of movement, for example, entering 10 means moving 10 mm