HandTop HT3020UV-C-K, Operation Manual

Page: 82 / 97

81 / 97
※
Operating instructions
1.Start-up operation
The user has to go through the safety precautions in chapter Six before the
first-time operation. And all operations to be done by beginners must be executed
under the instructions of professional technicians.
In case of emergency, Press the emergency stop button, machine will power off
immediately
Note. These four power circuit breakers only have to be turned on in the initial
operation. Once the equipment maintains in constant working phase, there is no
need to turn them off anymore.
Connect power supply
Turn on the main power breaker
Turn on PC
Turn on the four scram stop on each corner of the printer. Then press the green
button for activation.
Check if the reading value of the pressure is normal
Activate the air blower and turn on the corresponding suction sector
of the platform where the media is laid
Activate the UV lamp and carry on to the normal printing job.
For the buttons location please go to Structure diagram
If machine giving buzzer alarm when it’s on