handi quilter Infinity 26 Page 63 User Manual Download

Page: 63 / 90

62 |

www.HandiQuilter.com

The opti ons for customizing the star and diamond butt ons are:

Opti on

Acti on Performed

None

The butt on will not perform a functi on.

Start/Stop

Starts or stops sti tching

Needle Up/Down

Performs a half sti tch by cycling the needle up or down

I n c r e as e

Increases sti tching speed

Decrease

Decreases sti tching speed

Thread Cut

Cuts the bobbin thread

I n c r e as e T e n s i o n

Increases (ti ghtens) the top tension

Decrease Tension

Decreases (loosens) the top tension

Camera (Front Display)

Displays video from the camera on the front display

Camera (Back Display)

Displays video from the camera on the back display

Tie Off

Performs a ti e-off sti tch

IMPORTANT: If you use HQ Pro-Sti tcher, it will override your setti ngs for the star and diamond

handlebar butt ons for selected HQ Pro-Sti tcher functi ons. For more informati on about using

HQ Pro-Sti tcher with the Infi nity, refer to the HQ Pro-Sti tcher user manual.

L as e r L i g h t s

The Infi nity comes equipped with two laser lights. One is by the needle to

precisely show where the needle will enter the quilt. The other is the laser

stylus that is used at the back of the machine for tracing pantographs.

Turn on or off one or both of the lasers with the Laser setti ngs.

For more informati on about installing the laser stylus, see Install the Laser

Light Stylus i n t h e Installati on and Setup secti on of this manual.

ONLINE: For more informati on about quilti ng with pantographs, watch the video

Using Pantographs at: htt p://www.handiquilter.com/videos/hq-infi nity/240/.

To turn the lasers on or off

• T o u c h t h e Setti ngs icon in the toolbar. Then touch the Lasers butt on.

Touch the light butt on to turn the laser on or off .

Summary of Contents for Infinity 26



























































































Search results

Summary of Contents for Infinity 26

Reviews:

Related manuals for Infinity 26

Brands by name

Popular brands

handi quilter Infinity 26, User Manual

Search results

Summary of Contents for Infinity 26

Reviews:

Related manuals for Infinity 26

Brands by name

Popular brands