HQ Infi nity User Manual
| 4 9
To control the lights on the machine
• To open the Lights screen, touch the Lights icon in the toolbar. Aft er selecti ng the icon, it turns
green and Lights screen opens.
When lights are on, the on/off butt on displays in color.
Touch the on/off butt on to quickly turn off the light.
Touch the All Lights (1,2,3) butt on to turn on all of the lights
at once. If they are already on, touch the butt on to turn off
al l l i g h t s a t o n c e .
Otherwise, use the slider to vary the intensity of the light.
Touch the black dot and drag to the right to increase
the intensity or to the left to decrease the intensity. The
intensity setti ngs are saved when lights are turned off and
will be the same when you turn them on again.
To use UV lighti ng
UV lighti ng can be very useful when viewing white thread or white chalk on white fabric. The best contrast
is achieved when viewed in a dark or dimly lit room. Although Handi Quilter has chosen to use UV lights
which emit a light wavelength at the lowest end of the UV spectrum to minimize eye strain and damage,
constant or direct exposure to any UV lighti ng can cause eye strain and may lead to permanent eye
damage. Be careful and avoid looking directly at the UV lights (which emit a violet colored light). The UV
lights should only be used when other lighti ng sources cannot produce the visual contrast necessary to
achieve accurate quilti ng.
Touch the UV
light butt on to
turn it on or off .
When you turn
the UV lights on,
all other lights
are turned off .
Light 1 is under
the arm of the
machine. Light 2 is
the light ring that
illuminates the
needle and sti tching
area. Light 3 is on
the handlebars and
adds light to the
sti tching area.
The Lights
butt on is selected
(green).
