32 |
www.HandiQuilter.com
To adjust the bobbin tension
• Make the adjustment using the screw in the
center of the tension spring. Turn clockwise
to tighten and counterclockwise to loosen the
bobbin case tension. Make tiny adjustments to
the bobbin tension and test again.
To insert the bobbin case into the machine
ONLINE: For more information about inserting the bobbin case into the machine, watch the video
Inserting the Bobbin Case at: http://www.handiquilter.com/videos/hq-infinity/227/.
1 . Move the needle to the up position. Turn off the front power to the machine.
2 . Place the bobbin in the bobbin case so that the thread pulls off clockwise when viewing the
open side.
3. Slide the thread through the slot and under the tension spring, leaving 5 to 6 inches of thread
h an g i n g l o o s e .
4 . To fit the bobbin case onto the hook spindle
in the machine, orient the bobbin case as
shown in the photo with alignment notch to
the right. Push the bobbin case inward until it
clicks into place.
NOTE: Do not insert the bobbin case into the machine by lifting the lever on bobbin case. Use the
lever only for removing the bobbin case.
Easy-Touch Tension™
One of the joys of quilting with the Infinity is its ability to handle many different types of thread. You can
quilt with almost any high-quality thread as long as you first adjust the bobbin tension and then adjust the
top tension to suit the thread you’ve chosen.
Alignment
notch
