manualshive.com logo in svg

handi quilter Infinity 26, User Manual

Share
Download
handi quilter Infinity 26 User Manual Download Page 61

60  | 

 www.HandiQuilter.com

5 .   Esti mate how much bobbin thread you think you’ll use for 

ti eoff s and decrease the bobbin capacity by that much. Press 

the minus (–) butt on to decrease the capacity. Or, touch the 

Bobbin Capacity box to pop up an onscreen number pad and 

enter the number directly.

6.  When you are ready to use a full bobbin with that type of 

thread, insert the full bobbin and press the Reset Bobbin 

butt on on the Main screen

7 .   Make sure the alarm icon is enabled (green), or on. If not, 

touch the alarm icon to toggle it on. When the bobbin level 

reaches zero, the low-bobbin alarm will sound if it is 

t u r n e d  o n .

 

NOTE: If you turn on or off  the low-bobbin alarm on this screen, it is also turned on or off  on the 

A l ar m s  s c r e e n .

The next ti me you use one of the threads for which you’ve set up a low-bobbin threshold, touch the bobbin 

name box and choose the specifi ed thread name by touching it. Insert a full bobbin with that thread into 

the machine and press the Reset Bobbin butt on on the Main screen.

To delete a low-bobbin confi gurati on

•   Touch the bobbin name box and choose the specifi ed thread name by touching it. Then touch the 

Delete Bobbin butt on.

To edit a low-bobbin confi gurati on

•   Touch the bobbin name box and choose the specifi ed thread name by touching it. Then touch the 

Edit Bobbin butt on. Make any changes using the pop-up keyboard.

Handlebar butt on opti ons

Your Infi nity came with labels for the handlebars because you can decide which functi ons you want on the 

right and left  handlebars. For example, use the left  handlebar for starti ng and stopping your quilti ng and 

the right handlebar for moving the needle up and down to pull up the bobbin thread, or vice versa. For 

more informati on about the handlebar labels, see To att ach labels to the handlebars in the Installati on and 

Setup secti on of this manual. 

Aft er you have placed the labels on the handlebars, use the handlebar customizati on setti  ngs to confi rm 

your handlebar butt on choices and to make other customizati ons as to what the star and diamond butt ons 

on the handlebars will do.

8 . 8

Summary of Contents for Infinity 26



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands