handi quilter Infinity 26 User Manual Download

Page: 22 / 90

HQ Infinity User Manual

| 2 1

3. Slide the slot of the spool tray onto the knob’s

bolt. Finger tighten the knob until the spool tray

is firm against the throat of the machine.

To adjust the position of the thread tray

After the thread tray and thread mast are installed, you will be able to slide the tray and thread mast along

t h e l e n g t h o f t h e m ac h i n e .

• Loosen the knob at the bottom of the

thread tray until the tray can move freely

along the Handi Accessory Rail. Position the

tray where you want it and finger tighten

the knob.

Install the Quilt-View™ Video Camera with Quilter’s Eye Technology

A video camera comes with the Infinity. It is installed to preview the quilting on the backing of the quilt.

To install the Quilt-View video camera

ONLINE: For more information about installing the video camera, watch the video Installing the

Video Camera at: http://www.handiquilter.com/videos/hq-infinity/218/.

Summary of Contents for Infinity 26



























































































Search results

Summary of Contents for Infinity 26

Reviews:

Related manuals for Infinity 26

Brands by name

Popular brands

handi quilter Infinity 26, User Manual

Search results

Summary of Contents for Infinity 26

Reviews:

Related manuals for Infinity 26

Brands by name

Popular brands