HandHeld ALGIZ RT7, Manual

Page: 30 / 60

30
Ver 1.2
5.1.3. SIM cards
The Algiz RT7 supports up to two SIM cards in a Dual SIM, Dual Standby (DSDS) configuration. The SIM cards
screen (see
allows you to configure your preferences for the inserted SIM cards.
Either SIM card may be individually enabled/disabled, you may also configure preferred SIM to use for data or
voice calls.
FIGURE 5.16. SIM CARDS
5.1.4. Ethernet
To connect to an Ethernet network, use the "Ethernet" option under Wireless & networks settings. The "Enable
Ethernet" option (shown in
allows you to turn ON or turn OFF the Ethernet
connection as needed.
The "Ethernet IP Assignment" option provides two methods of configuring the Ethernet port:

Automatic IP address configuration using DHCP. This is on by default.

Static IP address.
You may directly assign the properties of the Ethernet port using "Static IP" option. To do this, you needs to
have the following information handy:

The IP address you wish to assign to the device.

The netmask of the network you are connecting to.

The IP address of the gateway.

The IP address of the DNS server.
All the IP addresses (interface address, gateway, DNS) are entered in dotted IP notation e.g. "192.168.100.152".
The netmask needs to be entered in CIDR format, e.g. "24" is equivalent to "255.255.255.0".