Hand Held Products Quick Check 600 Series, User Manual

Page: 37 / 120

Quick Check® 600/800 Series User’s Guide 3 - 13
Additional results you can display and the criteria used include:
• Symbol type
• Wide-to-narrow ratio (traditional)
• Light reflectance (traditional and ISO/IEC)
• Dark reflectance (traditional and ISO/IEC)
• Symbol contrast (ISO/IEC)
• Reflectance minimum/maximum (ISO/IEC)
• Edge contrast minimum (ISO/IEC)
• Defects (ISO/IEC)
• Message length
• Bar growth (traditional)
Error override allows you to set the verifier to replace the default or user-selected
Upper and Lower Parameter Result lines with any error information or messages
that might result from the bar code scan analysis. If more than two errors result
from a scan, the first two appear on the display and you can scroll the display to
view the other errors. The default for Error Override is
NO .
When you select ISO/IEC criteria, you can use the LED’s display feature to set
the LEDs to indicate bar growth/loss or pass/fail grade and result grade. In
addition, when you select ISO/IEC criteria, the five multi-colored LEDs normally
indicate symbol pass or fail based on the ISO/IEC criteria. With the LED feature
set to Bar Growth, the LEDs provide information on bar growth or loss, just as
they would if you selected traditional pass/fail test criteria.
Print Options
The print options allow you to select:
• Printer type (QCP or QCHSP)
• Printout form (long or short)
• Automatic options — automatically print data when the unit is connected to a
printer and turned on, automatically store data when the unit is not connected
to a printer
• Auto Print/Store with or without Profile
You can use any one of the three optional accessory hardcopy printers, but you
need to select the printer before you try to print. Supported printers include:
• QCP (standard printer)
• QCHSP (High-Speed Printer)
Refer to
Chapter 5, Saving and Printing for more information about these
printers.
AutoPrint/Store
The AutoPrint/Store option automatically prints or stores your data:
• When you have the AutoPrint/Store feature turned on and a printer connected
to your verifier and turned on, your scan results print automatically. You
cannot store results when a printer is connected and turned on.