![background image](http://html1.mh-extra.com/html/hand-held-products/dolphin-9500/dolphin-9500_supported-equipment-manual_3514559055.webp)
Terminal Setup
Sending Configuration Files to the 7400/9500 Terminal
rminal.
.
n the
icon.
6. C
n using the terminal in the cradle or a
baud rate of
Direct 115200
when using the terminal with the cable.
7. Click on
OK
.
8. Close the screen.
9
.
Go into
Tweak Activesync
(an Hand Held Products utility) on the PC.
10. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you are using a cable with the terminal.
1. Cold boot the te
2.
Click
Enter
.
3. Go to
Start
,
Settings
, and
Control Panel
on the terminal
4. Double-click o
Communications
5. Select the
PC Connection
tab
.
hoose a baud rate of
Infrared 57600
whe
11. Click on
Close Activesync
,
then
click on
Open Activesync
.
Supported Equipment Manual
•
January, 2006
2-45
Summary of Contents for Dolphin 9500
Page 1: ...Supported Equipment Manual for the 7400 and 9500 Computers Manufactured by Hand Held Products...
Page 6: ...Introduction Pictures 7400 9500 Supported Equipment Manual January 2006 1 2...
Page 10: ...Introduction This page is intentionally blank Supported Equipment Manual January 2006 1 6...