Terminal Setup
Sending Program Files to the 7400/9500 Terminal
1. Cold boot the
inal.
2. On the terminal, click on
Enter
.
3. Double-click on the
My Computer
icon
4. Double-click on the
IPSM
icon.
5. Select the
Twin Client
folder.
6. Choose
Delete
the
File
menu
.
7. Choose
Yes
at the prompts.
8. Cold boot the terminal.
9. Click
Enter
.
10. Go to
Start
,
gs
, and
Control Pa
11. Double-click on the
Communication
icon.
12. Select the
PC Connection
tab
.
13. Chose a baud rate of
Direct 115200
when using the terminal with the cable, and
choose a baud rate of
Infrared 57600
when using the terminal in the cradle.
14. Go into
Tweak Activesync
(an Hand Held Products utility) on the PC.
15. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you ar
ng a cable with the t
term
.
from
Settin
nel
.
e usi
erminal.
16. Click on
Close Activesy
c
lick on
Open A
nc
.
nc
,
then
ctivesy
Supported Equipment Manual
•
January, 2006
2-51
Summary of Contents for Dolphin 9500
Page 1: ...Supported Equipment Manual for the 7400 and 9500 Computers Manufactured by Hand Held Products...
Page 6: ...Introduction Pictures 7400 9500 Supported Equipment Manual January 2006 1 2...
Page 10: ...Introduction This page is intentionally blank Supported Equipment Manual January 2006 1 6...