Terminal Setup
Standard Setup
nd can be modified by the following methods:
Twin Client Manager.
to use the Twin Client Manager and the terminal menu
systems to set up the terminal. Also described are the methods for authorizing the
The Twin Client Manager provides a Standard Settings
tab for automatic setup of the
terminals. Choose
Standard
under the
View
menu. The options within this tab vary
s described below.
VT and HP Settings
Select the VT and HP emulation setup by clicking on the
S
The default terminal setup is sufficient for most installations. However, to meet site-
specific requirements, it may be necessary to customize terminal operation. The standard
setup options simplify this process a
•
Using the
•
Using the Twin Client terminal menu system.
This section describes how
terminal software.
Setup Using Twin Client Manager
according to the emulation selected, each of which i
ettings
menu and then the
Emulation
menu, as shown below.
Then click on the
VT100
,
VT220
,
or
HP700
selection, as shown below.
k on
OK
after the selection is made, and return to the main Twin Client Manager
Clic
menu. The standard settings tab will now reflect the settings for VT/HP emulation.
Supported Equipment Manual
•
January, 2006
2-13
Summary of Contents for Dolphin 9500
Page 1: ...Supported Equipment Manual for the 7400 and 9500 Computers Manufactured by Hand Held Products...
Page 6: ...Introduction Pictures 7400 9500 Supported Equipment Manual January 2006 1 2...
Page 10: ...Introduction This page is intentionally blank Supported Equipment Manual January 2006 1 6...