Hammond XK-3 Owner'S Manual Download

Page: 38 / 114

*#1 :-

Owner’s Manual

VIBRATO/CHORUS

VIBRATO adds warmth to the tone, by slightly changing the Drawbar pitch at a
certain speed.
You can also add richness to the sound by mixing the Vibrato sound with the
fundamental (= Chorus Effect).

[VIBRATO/CHORUS] BUTTON

This switches ON and OFF Vibrato/Chorus Effects.
It affects on the UPPER and LOWER Part.
To get this effect, press the button and the LED will light.

[VIBRATO/CHORUS MODE] KNOB

This knob controls the depth of Vibrato and switches ON and OFF the Chorus Effect.

V-1:

Comparatively slight Vibrato

V-2:

Standard depth Vibrato

V-3:

Deepest Vibrato

C-1:

Comparatively slight Chorus

C-2:

Standard depth Chorus

C-3:

Deepest Chorus

NOTE:

While the power is ON, either of Vibrato/Chorus is selected.

NOTE:

You can change the speed of the Vibrato Effect. (P. 71)

Summary of Contents for XK-3



















































































































Search results

Summary of Contents for XK-3

Reviews:

Related manuals for XK-3

Brands by name

Popular brands

Hammond XK-3, Owner'S Manual

Search results

Summary of Contents for XK-3

Reviews:

Related manuals for XK-3

Brands by name

Popular brands