Hammond XK-3 Owner'S Manual Download

Page: 21 / 114

Turn On and Play

LISTEN TO THE DEMONSTRATION PERFORMANCE

In your XK-3, the demonstration performance is built in for introducing the
features and sound.

STEPS

Touch the [DEMO] Button for a while.
The Display will be as shown lower left.

NOTE: If the Display does not change, touch the [MENU]

Button to display the MENU, touch the [PAGE]
Button and select page A, and touch the
[3]”DEMO”.

Press the [PAGE] Button and select a desired song.
The performance starts when the [4] “

” Button is pressed.

NOTE: After the song is over, the next one starts auto-

matically.

To select a new song while you are playing, touch the [3]”

”

Button. The performance that is playing will stop.

NOTE: You can not operate the controllers while playing

the demonstration, except [MASTER VOLUME],
[LESLIE BRAKE], [LESLIE ON], [LESLIE FAST],
[VIBRATO & CHORUS] and [REVERB].

If you press the [DEMO], [MENU/EXIT] or [PLAY] Button,
the performance stops.

NOTE: The demonstration performance does not destroy

the previous settings.

Summary of Contents for XK-3



















































































































Search results

Summary of Contents for XK-3

Reviews:

Related manuals for XK-3

Brands by name

Popular brands

Hammond XK-3, Owner'S Manual

Search results

Summary of Contents for XK-3

Reviews:

Related manuals for XK-3

Brands by name

Popular brands