manualshive.com logo in svg

Hammond XK-3, Owner'S Manual

Share
Download
Hammond XK-3 Owner'S Manual Download Page 27

Turn On and Play

27

STORING REGISTRATIONS IN COMBINATION PRESET

All the afore-mentioned settings can be memorized to the Combination
Preset.
The data stored at the factory can also be freely re-written.

EX.  Memorize to "F - D".

1.

While pressing the [BANK] Button, press the Preset Key [F].

The LED on the Preset Key indicates BANK while the [BANK] Button is
pressed.

NOTE: The LED goes out if you release the button.  This means the

Preset is not final.

2.

While pressing the [REC/JUMP] Button, press the Preset Key [D].

The Preset is finalized and Recording Preset appears on the display for a while.
When the recording is completed, the LED on the Preset Key [D] flashes for a
few  seconds and then switches on.  The Display returns to the previous mode.
The recorded Preset will be automatically selected.

™

The Preset Key [B] (or [A#] - when the control mode is in “Upper
A#/B”) does not memorize registrations by this operation.

NOTE: The recorded Preset data does not go out if the power is

switched off.

1

2

Light

Press and Hold

Touch

Press and Hold

Touch

Flash to

On

Summary of Contents for XK-3



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands