Hammond XK-3, Owner'S Manual

Page: 51 / 114

Using the Control Panel
51
Decrease the value, using the [VALUE] button or the [VALUE]
knob on the right bottom.
NOTE: Repeat the operation 1 - 5, if you want to change the other
parameter, too.
Record into the Combination Presets.
The “DECAY FAST” is a Preset Parameter, it will go back to the set value, if you
call out the other (or current) Combination Preset.
If you want to continue to use the changed value hereafter, you must record the
value into the Combination Preset.
PRESET PARAMETERS
They are the Parameters to be recorded
into each Combination Preset.
They include the Parameters for setting
the status of the buttons/knobs on the
panel, “Decay Fast” and many others.
The overall/general common Parameters
(which are not included in the Combina-
tion Presets) are called “Global Param-
eters.”
Move the CURSOR to the Parameter you want to change.
DECAY TIME is on the “DECAY” PAGE. Move to that page using
the [PAGE] button.
“FAST” is on the right end. Move the CURSOR (flashing value) to
underneath “FAST” using the [PARAM] button.
Change the value.
4
5
6
Touch and Hold
Touch