Hammond XK-3 Owner'S Manual Download

Page: 90 / 114

*#1 :-

Owner’s Manual

SAVE THE SETUP

On this keyboard you can save the setting of each Parameter, as a file, into the
CompactFlash™ card (hereinafter "CF card").

CF CARD YOU CAN USE

The manufacturer recommends HCF-32, as your CF card.
Please consult URL: http://www.hammondsuzuki.com before you try to use other cards
on the market.

CF CARD SLOT

First please read the lavel on the CF CARD carefully and insert it correctly.

To take out the card, push the EJECT button on the right hand side of the slot.

Don't eject the card or switch the power off during initializing or setting it up.

THE CONTENT AND CAPACITY TO BE SAVED

The content the CF CARD can save are:

Combination Presets

Global Parameters

Custom Tonewheels

Leslie Cabinets

Adjust Presets [A#], [B]

Temporary Parameters

Also, this card can save/read out all of them as a whole by the unit called "SET-UP".
The capacity of one SET-UP is approximately 28 KB.

Eject Button

Summary of Contents for XK-3



















































































































Search results

Summary of Contents for XK-3

Reviews:

Related manuals for XK-3

Brands by name

Popular brands

Hammond XK-3, Owner'S Manual

Search results

Summary of Contents for XK-3

Reviews:

Related manuals for XK-3

Brands by name

Popular brands