6
Adjustments and tool changes
1.1.2
Change the fence plate (guide) over
1
2
3
4
5
Fig. 2: Mount the guide in a flat position
1 Thumb screw (clamping of the fence plate)
2 Guide (fence plate)
3 Groove
4 Clamping rail
5 Scale indicator
When the fence plate is mounted flat, the distance to the saw blade changes. By
moving the scale indicator, the change in the cutting width can be corrected.
1.
Loosen the thumb screw.
2.
Pull the fence plate (guide) out backwards.
3.
Turn the fence plate (lay it flat on the table) and then slide it back on, using
the respective groove.
4.
Tighten the knurled thumb screw.
5.
Slide the scale indicator in the direction of the saw blade until it reaches the
locking point.
🡆
Read the corrected measurement from the front edge of the indicator.
Summary of Contents for K2 M
Page 55: ......
