27
K2 M - Part 2/2
Use
2.3
Working techniques
2.3.1
Working area
WARNING
Ejected workpieces / tool parts
Risk of injury due to ejected workpieces and workpiece parts (e.g.
cutting tools, branches, trimmings).
Injury due to kickback from cut workpiece parts.
−
Never stand directly in the cutting line of the saw blade whilst
it is operating (when machining or in idle).
−
Assume the correct working position.
2
1
3
Fig. 23: Working positions
1 Work position when operating with the rip fence
2 Main work position for all other operations
3 Danger zone - 120 mm
The danger zone is the area 120 mm to the left, right, in front of and behind the
saw blade.
Do not reach into the danger zone with your hand.
Never place your hands on the workpiece in the danger zone.
2.3.2
Authorised working methods
Only the following working techniques are allowed with the panel saw:
●
Trimming only with the use of a trimming device.
●
Crosscutting, with parallel or crosscut fence.
●
Longitudinal cut 90° to 45°, with a parallel cutting fence.
●
Splitting of larger sized panels.
Summary of Contents for K2 M
Page 55: ......
