17
K2 M - Part 2/2
Adjustments and tool changes
1.4.3
Fit /change the riving knife
1
2
3
4
5
Fig. 12: Fitting the riving knife
1 Clamping screw
2 Riving knife
3 Serrated washers
4 Bolts
5 Saw blade
Tool:
●
Combination wrench 17 mm
1.
Loosen the clamping screw.
2.
Remove the riving knife if required.
3.
Insert the riving knife into the holder.
🡆
The riving knife holder bolt must sit in the riving knife groove.
4.
Move the riving knife into the correct position.
adjust riving knife’ on page 15
5.
WARNING
Flying pieces
Severe injuries and damage to property.
●
Minimum tightening torque of the clamping bolt: 25 Nm.
Tighten the clamping screw.
Summary of Contents for K2 M
Page 55: ......
