48
Troubleshooting
1
2
X1
X2
3
4
Fig. 38: Freecut preparation
1 Riving knife and saw guard
2 Saw blade ø253 mm
3 cutting saw teeth
4 high running saw teeth
X1 Rip fence setting
X2 Free cut adjustment
Prepare the machine for adjustment
1.
Switch off the machine and secure it against being switched on again.
2.
Disconnect the machine from the mains power supply.
3.
Remove riving knife and saw guard.
4.
Fit ø253mm saw blade.
5.
Tilt the saw aggregate in the 90° position (cutting angle 0°) and move to the
uppermost position.
6.
Change the fence plate (guide) on the rip fence over on to the narrow guide
edge.
7.
Set the rip fence to an even measurement and fix in place.
🡆
Check dimension X1 = 30.0 mm with digital calliper.
Summary of Contents for K2 M
Page 55: ......
