39
K2 M - Part 2/2
Maintenance
3.
Push the
[Emergency stop]
.
Machine stops immediately.
1.
Continue with next step.
Machine does not stop immediately.
1.
If present: Switch off
[Main switch]
(position
"O" / "OFF"
).
2.
Disconnect the machine from the mains power supply.
3.
Contact Felder-Group service centre.
4.
Switch the machine on using the green
[start]
button with the
[emergency
stop]
button locked.
Machine does not start.
1.
Unlock the
[Emergency stop]
button by turning it.
2.
Repeat with all
[Emergency Stop]
buttons on the machine.
Machine can be started.
1.
Press the red
[Stop]
button.
2.
If present: Turn the
[main switch]
off (position
"O" / OFF
)
and secure it.
3.
Contact Felder-Group service centre.
Check the red
[stop]
button and the emergency stop on machines not equipped with an
[emergency stop]
button
Carry out emergency stop test with all red
[Stop]
buttons on the machine.
1.
Prepare the machine to operate.
2.
Switch machine on.
3.
Press the red
[Stop]
button.
Machine stops immediately.
1.
Repeat the test on the next red
[Stop]
button.
2.
Repeat with all red
[Stop]
buttons on the machine.
Machine does not stop immediately.
1.
If present: Switch off
[Main switch]
(position
"O" / "OFF"
).
2.
Disconnect the machine from the mains power supply.
3.
Contact Felder-Group service centre.
Check the time it takes for the machine to come to a stop
Configuration of the machine without a motor brake:
The machine is not equipped with a motor brake. The design of the machine
guarantees that the saw arbour comes to a standstill within the legally applicable
standstill time of 10 seconds.
1.
Prepare the machine to operate.
2.
Switch the machine on and briefly let it run.
Summary of Contents for K2 M
Page 55: ......
