www.hameco.eu
HV-100E User Manual
hameco
14
Dynamic range:
Set the dynamic range (default off, 1-8 optional).
Shutter speed: Active when it is status of manual or shutter-priority (default 1/50，1/25，1/30，
1/50，1/60，1/90，1/100，1/120，1/180，1/250，1/350，1/500，1/1000，1/2000，1/3000，
1/4000，1/6000，1/10000 optional).
Aperture value:
Set the aperture value, active when it is status of manual or aperture-priority (default
close, F1.8, F11, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0 optional).
Brightness:
Set the brightness value, active when it is a state of brightness priority (default 11, 0-23
optional).
Gain:
Set the gain value, only valid when the exposure mode is manual and shutter priority (default
1,0-20 optional)
b. Color:
White balance, saturation, color, white balance, sensitivity, color temperature, gain red and
blue gain can be set.
White balance modes:
Set the white balance mode
(the default automatic, 2400K-7100K, manual,One-push optional).
Note: Click the “Correction” button when selected the One-push white balance mode.
Red fine-tuning:
default 0, -10~10 (only available in automatic mode)
Blue fine-tunable:
default 2, -10~10 (only available in automatic mode)
Saturation:
Set the saturation (default 36, 0-127 optional).
Chroma:
Set the chroma (default 4, 0-8 optional).
White balance sensitivity:
Set the white balance sensitivity
(default is high, medium, low for options)
Red Gain:
Set the red gain, effective when it is manual (default 36, 0-255 optional).
Blue Gain:
Sets the Blue gain, effective when it is manual (default 36, 0-255 optional).
c. Image:
Brightness, contrast, sharpness, black and white mode, the gamma curve,
Horizontal Flip and Vertical Flip can be set.
Brightness:
Set the brightness (default 50, 0-100 ptional).
Contrast:
set the contrast (default 50, 0-100 optional).
Sharpness:
Set the sharpness value (default 4, 0-15 optional).
Black and white mode:
Set black and white mode (default color, black/white optional ).
Gamma:
Gamma value setting (default, 0.45, 0.50, 0.55, 0.63 optional).
Ultra-low illumination:
default off
d. Noise Reduction:
2D noise reduction, 3D noise reduction
2D Noise Reduction:
Set 2D noise reduction level (default off, 1-8 optional).
3D Noise Reduction:
Set 3D noise reduction level (default 2 and 1-8, Off optional).
e. Style:
select the picture style (default, standard, clear, bright, soft and USB optional)
Note: Click “Refresh” to make revision of any video parameters of a, b, c, d, e effective.
