www.hameco.eu
HV-100E User Manual
hameco
13
2) Stream Release
Stream:
You can set any stream release of close-up main stream, close-up sub-stream, panoramic
main stream, panoramic sub-stream, and guide stream
Switch:
To turn on/off close-up main stream, close-up sub-stream, panoramic main stream, panoramic
sub-stream and blackboard code stream.
Protocol:
Set protocol (default RTMP protocol, RTSP, SRT are optional)
Host Port:
server port number (default 1935, 0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0, live / av1, live/av2,live/av3,live/av4 optional).
User:
Set the user name.
Password:
Set the password.
Click on the “Save” button to display the “Save successful” message, then settings take effect.
SRT Password:
Set SRT stream password
SRT password length:
set the length of SRT stream password
3) RTP Broadcasting
Stream:
Set any of the close-up main stream, close-up sub-stream, panoramic main stream, panoramic
sub-stream, guide stream, multicast or unicast
Switch:
To turn on/off close-up main stream, close-up sub-stream, panoramic main stream, panoramic
sub-stream and blackboard code stream.
Protocol:
Set multicast protocol (default RTP multicast, TS multicast, UDP unicast, TCP unicast op
-
tional)
Address:
Default 224.1.2.3. It can be edited.
Port:
Main Stream Default Port: close-up main stream default 4000 , close-up sub-stream default 4002
panoramic main stream default 4004,panoramic sub-stream default 4006,broadcast code stream de
-
fault 4008.
Visit:
Address comes up after setting. Eg ; rtp: //224.1.2.3:4000; udp: //@224.1.2.3:4000
4)Video Parameters
a. Exposure:
Exposure mode, exposure compensation, back light compensation, anti-flicker, gain
limit,
wide dynamic, shutter speed, aperture value and brightness can be set.
Exposure Mode:
Set the exposure mode (the default automatic, manual, shutter priority, aperture
priority, Brightness priority optional)
Exposure compensation:
Exposure compensation setting is active when it is auto status (default is
off).
Exposure compensation value:
Set the exposure compensation value, valid when it is set for auto
(default 0, -7 to 7 optional).
BLC:
Set back light compensation, valid when it is auto status (default is off).
Anti-flicker:
Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority
(default 50Hz, closed, 60Hz optional).
Gain limit:
set the gain limits, only valid when exposure mode is automatic, aperture/brightness prior-
ity.(default 4, 0-15 optional).