HAMAR LASER L-705, Manual

Page: 23 / 49

20
2. Using a screwdriver, remove the large
magnetic base dustcover screw. On top of
the magnetic base you will see the four
attachment screw holes, however, you will
only use three screws to attach the bracket to
the magnetic base. This is a kinematic
mount that stabilizes the laser base for
accurate and stable measurements.
3. Attach the L-111 mounting block to top of the magnetic base, making sure that the level vial is facing
opposite the magnetic base switch. Make sure to tighten the bolts very tight to ensure there is no
movement in the block when being used.
Note:
The post-block can be mounted 90 degrees from the standard mounting if the v-block bottom of
the mag base fits better on the surface.