14
8.
Connecting
／
Removing Equipment
This chapter explains how to connect and disconnect devices.
Caution
Turn off the power before connecting or disconnecting.
Caution
Always remove static electricity from the body before touching
the equipment.
8.1
Connection procedure
Connect the LCOS-SLM head, LCOS-SLM controller and PC as follows.
(1) Connect the LCOS-SLM head side FPC cable to the LCOS-SLM controller side FPC cable via the FPC
connector on the relay board. When connecting the relay board, refer to page 15, "Connecting the relay
board" for precautions.
(2) The relay board is placed in the relay board cover. For details, see "relay board cover assembly" on
page 17.
(3) Connect a DVI-D cable from the DVI connector on the LCOS-SLM controller to the DVI-capable PC.
Please prepare your own PC.
(4) Connect the LCOS-SLM controller to the power supply using the power cable and AC adapter supplied
with the controller.
Fig.7
connection diagram
