SENSITRON
A Halma Company
MT4984
MU+ PK-32
Manual (EN)
P. 62/14
3.12 PRINT
If a Printer is connected to the control panel and in the Set Printer Mode the On
Request parameter is selected (see next paragraph) by selecting PRINT and
pressing ENT one starts the printout of the system detector list with all the pro-
gramming data (Zone, detector description, Alarm levels etc.).
ABORT PRINT
To stop and cancel the printout
SET PRINTER MODE (Users level “M” and “E”)
This parameter is used to select the print mode.
ON REQUEST
In this case, the control panel only prints specific details (Event Log, detector list
etc.) at the user’s request, in the different menu. The printer can be connected
and disconnected at any time as required.
REAL TIME
This option switches the printer to on-line mode and requires that a printer be
continuously connected to the system.
Events are printed as and when they occur.
Please note
If Real Time is enabled, the event log and other options will not be printed at the
user’s request. The Real Time parameter must be disabled to permit all other
print option to operate.
3.13
SYSTEM INFO
At any user level, selecting SYSTEM INFO a window will show the information
about the hardware and the software versions:
Figure 32
Set Printer Mode option
Figure 33
System Info window