DUAL DRYER SYSTEM
INSTALLATION/SERVICE
MANUAL (L31279)
®
System Specifications
Dual Consep and
Dual Dryer
Dual Consep
Only
Dual Dryer
Only
Weight
53 lbs.
(with mounting bracket)
11 lbs.
40 lbs.
Envelope
20”W x 15”H x 12”D
6”W x 12”H x 8”D
14”W x 13”H x 10”D
Inlet/Outlet Ports
3/4” - 14 NPT
3/4” - 14 NPT
3/4” - 14 NPT
Control Port
1/4” - 18 NPT
n/a
1/4” - 18 NPT
Purge Port
1/4” - 18 NPT
n/a
1/4” - 18 NPT
Max. Working Pressure
150 PSIG
150 PSIG
150 PSIG
Safety Valve
160 PSIG
n/a
160 PSIG
Turbo Protection Inlet Required
35 PSI
n/a
35 PSI
Ambient Temperature
-40°F - +176°F
-40°F - +176°F
-40°F - +176°F
Maximum Inlet Air Temperature
+176°F
+176°F
+176°F
Recommended Inlet Air Temperature
+40°F - +150°F
+40°F - +150°
+40°F - +150°
Air Flow Capacity
70 SCFM
70 SCFM
70 SCFM
Minimum Purge Volume
600 in.
3
n/a
600 in.
3
Compressor Unloaded Time
30 seconds
n/a
30 seconds
Maximum Duty Cycle
25%
n/a
25%
Automatic Drain Valve
24VDC/1.0A
12VDC/2.0A
24VDC/1.0A
12VDC/2.0A
n/a
Heater Element
n/a
n/a
24VDC/4.0A
12VDC/8.0A
Heater Thermostat Operating Range
n/a
n/a
Closes 45° ± 7°F
Opens 71° ± 6°F
Heater Element Resistance
n/a
n/a
12VDC:1.4-1.8
W
24VDC: 5.9-6.9
W
Drain Capacity
n/a
1.3cc per ADV/Operation
n/a
Drain Options
n/a
Swivel Tube, Open
Muffler, Tube
Torque Specifications
Consep Mounting Bolts to Bracket .........................................6-11 ft-lbs (Tighten Bolts in Cross Pattern)
Dryer to Bracket: .....................................................................35-50 ft-lbs
Consep Inlet and Outlet Manifold M22 Banjo Bolts ...............45-55 ft-lbs
Dryer Inlet and Outlet Manifold M22 Banjo Bolts ..................45-55 ft-lbs
Dryer Control and Purge Manifold M12 Banjo Bolts ...............130-150 in-lbs
ADV Mounting Nuts to Consep ...............................................80-98 in-lbs
Heater Retaining Screw ...........................................................45-55 in-lbs
Turbo Protection Valve ............................................................45-55 ft-lbs
Check Valve Plug .....................................................................84-94 in-lbs
Valve Unit Bolts .......................................................................62-80 in-lbs
Cartridge Canister Bolts ..........................................................32-35 ft-lbs
Page 6
