05-7182-01.fm
73
Maintenance and Servicing
6. Slowly lift the battery trough upwards and swivel out to the side.
Assembly is in reverse order.
5.2.5
Battery plug coding
When using other batteries which have been approved by Hako, the plugs
must be re-coded.
The plug connectors between the battery
, the machine
Fig. 28-B
and the charger
Fig. 28-C
are coded with coloured coded pins (yellow, grey or
depending on the type of battery and rated voltage.
The following three prerequisites must be met for the whole system:
• Voltage coding (36 V) must be identical for all plugs and bushes.
• The colour of the coded pin in the connector housing of the machine is
always yellow.
• The colour of the coded pin in the charger plug (machines without built-in
charger) and in the bush housing of the battery must be identical:
• Grey for wet batteries
• Green for maintenance-free gel batteries
Note
Please ensure that the trough battery is in the correct installation
position! See connecting diagram
Fig. 27-B.
Warning
Risk of short circuit! The coding of the plugs should only be carried
out by a workshop authorised by Hako!
Fig. 28:
36 V
B
D
A
C
