HAKO Scrubmaster B260 R Operating Manual Download Page 49

Page: 49 / 106

03-7182-01.fm

Operation

3.3.1

Driver's seat

Adjust the driver’s seat in such a way that all controls can be easily reached.

Adjusting the standard driver’s seat

Sit on the driver’s seat and adjust as follows:

Adjust in longitudinal direction

• Push lever

Fig. 16-A

outwards.

• Move seat forwards or backwards.
• Release lever

Fig. 16-A

and let the driver's seat engage.

Adjusting the driver’s seat comfort

Sit on the driver’s seat and adjust as follows:

Attention

For reasons of safety, the driver's seat is equipped with a seat

contact switch. The function of the seat contact switch must not be

bypassed.

Danger

Do not adjust the driver’s seat while driving. Risk of accident!
• Only adjust the seat if the machine is stationary.

• The driver’s seat must audibly engage after adjustment.

Fig. 16:

Fig. 17:

Summary of Contents for Scrubmaster B260 R











































































































Search results

Summary of Contents for Scrubmaster B260 R

Reviews:

Related manuals for Scrubmaster B260 R

Brands by name

Popular brands

HAKO Scrubmaster B260 R, Operating Manual

Search results

Summary of Contents for Scrubmaster B260 R

Reviews:

Related manuals for Scrubmaster B260 R

Brands by name

Popular brands