Hakko Electronics FE-500, Instruction Manual

Page: 22 / 24

21
6. MAINTENANCE/ INSPECTION
中 文
English
日本文
Cover
Filter retainer
Filter

Cleaning the electrodes
1. Turn the power switch OFF and unplug the
AC adapter from the outlet.
2. Remove the cover.
3. Turn the knob at the center to the left and
remove the electrodes.
4. Clean the tips of the electrodes.
5. Assemble the components by reversing the
removal procedure.
CAUTION

Make sure fibers from the cotton swaps
do not stick to the electrodes.

When attaching the electrode, secure it
by turning the knob at the center to the
right as far as it will go.

Handle with care because the tips of the
electrodes are sharp.

Make sure the cover is securely attached
to the unit.

Changing the filter
1. Turn the power switch OFF and unplug the
AC adapter from the outlet.
2. Remove the filter retainer.
3. Install the new filter.
4. Install the filter retainer.

Checking the static elimination
effect
We recommend using the HAKKO 430 static
level meter to check how effectively the unit is
eliminating static. The HAKKO 430 measures
the electric potential and the ion balance of the
charged body without contacting it and indicates
the results on a digital display.
WARNING
Do not neglect to perform the maintenance and daily inspection procedures described
below. High voltages are produced inside the HAKKO FE-500 main unit. Dust collected on
high-voltage areas can present a fire hazard.