Hakko Electronics FE-500, Instruction Manual

Page: 23 / 24

22
7. REPLACEMENT PARTS / OPTIONS
中 文
English
日本文
CE Marking
The HAKKO FE-500 satisfies the requirements
of Low Voltage Directive (73/23/EEC) under
the following conditions:
Applicable standard: EN61010-1
Overvoltage category: II
Pollution degree: 2
Attach the cover securing bracket with screws.
As for the power supply, use the supplied AC
adapter. The specifications are as follows :
Applicable standard: EN60950
Overvoltage category: II
Pollution degree: 2
Be sure to ground the grounding terminal of
the AC cord.
Model No. HAKKO FE-500
Input Voltage DC24V±5% 360mA
Output Voltage AC3.5kV
Ion Balance
Factory adjusted to within ±5V (at 300
mm (12 in.) from the front panel)
Airflow 1.5 to 3.0 m3/min (variable)
Noise 52 dB(A) With maximum wind volume
Ozone Production
0.03 ppm or less (at a point 300 mm (12
in.) from the outlet and aligned with the
center of the outlet)
Max. Allowable
Ambient
Temperature
40°C (104°F)
Filter Pre-filter level
Dimensions
140(W) x 190(H) x 81(D) mm
5.5(W) x 7.5(H) x 3.2(D) in.
Weight
(w/o AC Adapter) 1.4 kg (3.1 lb.)
AC Adapter Input 100-240 VAC 50/60Hz 0.4 A
Weight of AC
Adapter (w/o cord) 135 g (0.3 lb.)
* Specifications and design are subject to change without
notice.
●
Options
Part Number Part Name
C1023 Arm stand

Replacement parts
Part Number Part Name
A1525 Filter
B3120 Discharge electrode
10 - 50mm
400mm
300mm
Cushion rings
The HAKKO FE-500 can be mounted
on the optional arm stand to provide a wider
range of angles and positions from which to
approach the charged body.
NOTE:
Place the supplied cushion rings at each side
between the main unit and the arm stand.
8. SPECIFICATIONS
Arm stand