14 / 48
Hakki Pilke 43 Pro
Translation
Version 6-2018
Note! Do not stand on the out-feed conveyor! Do not use the winch if the belt is worn!
3.2.
Controls
Figure 10. Controls
Names and functions of the controls in Figure 10
A.
Feed assist speed control
; only affects the automatic feed speed during splitting when the
feed assist mechanism is in use (switch B) (see Section 4.3.1).
B.
Feed assist mechanism switch
-
Switch in position 1: the feed assist mechanism is turned on: continues to feed for the
duration of the splitting cycle
-
Switch in position 0: the feed assist mechanism is turned off – no automatic feed.
C.
Control lever for guide plates that guide falling wood pieces
(see
Section 4.3.5
)
-
Upper position: AUTO: the guide plates are in automatic mode, i.e. the plates go up and
down automatically according to the movement of the saw bar